Introduction
This guide is for the replacement of the control panel and microphones for the Sonos One.
Ce dont vous avez besoin
-
-
-
Disconnect all power cords.
-
Remove the rubber foot and plastic screw guard on the bottom of the device using a plastic opening tool.
-
Note: the rubber foot and plastic screw guard can be removed as one piece to make reassembly easier
Demander à FixBot
-
-
-
Remove the four 10mm Torx T10 screws from the bottom of the speaker.
-
-
-
Remove the bottom cover by squeezing the protective cover slightly while pushing up with your fingers.
-
-
-
-
-
-
Remove the four 9mm Torx T8 screws from around the perimeter of the control panel.
-
-
-
With the front of the unit facing you, lift the control panel up using your thumbs.
-
-
-
Use a spudger to flip up the retaining flap on the control panel ribbon cable ZIF socket.
-
Pull the control panel ribbon cable out of its socket.
-
-
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
4 autres ont terminé cette réparation.
Équipe
USF Tampa, Team S2-G1, Nance Spring 2018 Membre de l'équipe USF Tampa, Team S2-G1, Nance Spring 2018
USFT-NANCE-S18S2G1
3 membres
24 tutoriels rédigés
1 commentaire de tutoriel
where can I buy a replacement control panel?
