Aller au contenu principal

Introduction

Prerequisite only. This guide shows how to disconnect the iPad Pro's display assembly.

  1. Remove the three 1.3 mm Phillips #000 screws securing the display cable bracket.
    • Remove the three 1.3 mm Phillips #000 screws securing the display cable bracket.

  2. Remove the display cable bracket. Remove the display cable bracket.
    • Remove the display cable bracket.

  3. Use the flat end of the spudger to disconnect the display assembly connector from the motherboard socket. Use the flat end of the spudger to disconnect the display assembly connector from the motherboard socket.
    • Use the flat end of the spudger to disconnect the display assembly connector from the motherboard socket.

  4. Repeat the previous step for the two remaining connectors. Repeat the previous step for the two remaining connectors.
    • Repeat the previous step for the two remaining connectors.

  5. Remove the display assembly. During reassembly, follow this display adhesive application guide to apply replacement display adhesive.
Conclusion

To reassemble your device, follow these instructions in reverse order.

Arthur Shi

Membre depuis le 03/01/2018

79 812 Réputation

262 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Community

108 membres

9 541 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 27