Remplacement des bandes adhésives d'un iMac Intel 27" EMC 2546

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.

Retourner au tutoriel

Anglais

Français

Étape précédente Étape suivante

Traduction de l’étape 15

Étape 15

iMac Intel 27" EMC 2546 Adhesive Strips Replacement: étape 0, image 1 de 2

iMac Intel 27" EMC 2546 Adhesive Strips Replacement: étape 0, image 2 de 2

Set the display back on the iMac's rear enclosure.
At this time, plug in your iMac, power it on, and test your repair before moving on to actually sealing up the computer. Be sure to check for full functionality of any hardware you removed or disconnected.
When you are finished, shut the iMac down and unplug the power cord before you continue.

-	[* black] Peel up and remove the remaining backings from all of the strips around the frame.
+	[* black] Set the display back on the iMac's rear enclosure.
+	[* icon_note] At this time, plug in your iMac, power it on, and test your repair before moving on to actually sealing up the computer. Be sure to check for full functionality of any hardware you removed or disconnected.
+	[* icon_caution] When you are finished, shut the iMac down and *unplug the power cord* before you continue.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.