Barre à brosse
3 Réponses Indice de 2 |
How to put the wand back in place. |
1 Réponse Indice de 4 |
Wand has no suction |
1 Réponse Indice de 1 |
Why is my Dyson multi floor ball not sucking when I cleaned it out |
1 Réponse Indice de 1 |
Why is only one side of the brush bar turning? |
Pièces
Outils
Voici quelques outils couramment utilisés pour travailler sur cet appareil. Vous ne devriez pas avoir besoin de tous les outils pour chaque procédure.
Modèles
Ball Multi Floor
Background
The Dyson Ball Multi Floor Upright Vacuum was released in 2012 and can be identified by the Dyson tag DC40. It is very similar in design and mechanical operation to its earlier counterpart, the DC41 Animal. It is well known for utilizing the Dyson Ball technology while using V8 suction. It has an orange color and is fairly lightweight while remaining a full size vacuum and most distinctively having the strongest suction of any vacuum. It has been known to fail by losing suction, turning on and off on its own, not supporting its own weight and remaining upright, not turning on, and the brush bar not turning.
Identification
To ensure that you have found the correct repair guide for the right device, make sure that there are the words Dyson Ball Multi Floor imprinted into the top front of the bottom portion of the vacuum near the suction.
Additional Information
Dyson's Support Page for Dyson Ball Multi Floor Upright Vacuum