Aller au contenu principal

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

HP 250 G3 WiFi Card Replacement

Ce dont vous avez besoin

  1. HP 250 G3 WiFi Card Replacement, WiFi Card: étape 1, image 1 de 1
    • Remove the battery.

  2. HP 250 G3 WiFi Card Replacement: étape 2, image 1 de 1
    • Remove the two indicated screws using a #1 Philips driver.

  3. HP 250 G3 WiFi Card Replacement: étape 3, image 1 de 3 HP 250 G3 WiFi Card Replacement: étape 3, image 2 de 3 HP 250 G3 WiFi Card Replacement: étape 3, image 3 de 3
    • Use a #1 Philips driver to remove the disc drive's screw.

    • Use a spudger to gently pry the drive out of the housing.

  4. HP 250 G3 WiFi Card Replacement, screws of the case 1: étape 4, image 1 de 3 HP 250 G3 WiFi Card Replacement, screws of the case 1: étape 4, image 2 de 3 HP 250 G3 WiFi Card Replacement, screws of the case 1: étape 4, image 3 de 3
    • Remove the rubber rests on the rear of the device, near the battery.

    • Remove the hidden screws placed under the rests using a #1 Philips driver.

  5. HP 250 G3 WiFi Card Replacement, screws of the case 2: étape 5, image 1 de 3 HP 250 G3 WiFi Card Replacement, screws of the case 2: étape 5, image 2 de 3 HP 250 G3 WiFi Card Replacement, screws of the case 2: étape 5, image 3 de 3
    • Remove the remaining screws on the bottom of the device.

    • Remove the two little screws at the DVD entrance.

  6. HP 250 G3 WiFi Card Replacement, removing keyboard: étape 7, image 1 de 3 HP 250 G3 WiFi Card Replacement, removing keyboard: étape 7, image 2 de 3 HP 250 G3 WiFi Card Replacement, removing keyboard: étape 7, image 3 de 3
    • Turn the laptop around.

    • Open up the laptop (to remove the keyboard).

    • Use a spudger or iSesamo to remove the keyboard.

    • Slide the iSesamo around the upper side of the keyboard as shown in the pictures (you will hear clicks).

  7. HP 250 G3 WiFi Card Replacement: étape 8, image 1 de 3 HP 250 G3 WiFi Card Replacement: étape 8, image 2 de 3 HP 250 G3 WiFi Card Replacement: étape 8, image 3 de 3
    • When it becomes loose, gently slide the keyboard to the left as shown in picture 3.

    • Be gentle because the thin ribbon may tear.

  8. HP 250 G3 WiFi Card Replacement, removing keyboard / ribbon cable: étape 9, image 1 de 3 HP 250 G3 WiFi Card Replacement, removing keyboard / ribbon cable: étape 9, image 2 de 3 HP 250 G3 WiFi Card Replacement, removing keyboard / ribbon cable: étape 9, image 3 de 3
    • Gently lift the keyboard up.

    • Spot the thin ribbon cable attached to the connector (the connector has a plastic lid).

    • Carefully open the lid with a spudger and slide the ribbon cable out of the connector.

    • Be very gently with the cable and the connector because the lid may come loose. If this happens, it is difficult to put the cable and the connector back in.

    • Close the lid again, after removing the cable, so that the cable cannot jump out.

  9. HP 250 G3 WiFi Card Replacement, removing upper plate/case: étape 10, image 1 de 3 HP 250 G3 WiFi Card Replacement, removing upper plate/case: étape 10, image 2 de 3 HP 250 G3 WiFi Card Replacement, removing upper plate/case: étape 10, image 3 de 3
    • Remove the screw circled in picture 2.

    • Remove the white ribbon cable from the connector.

    • Remove the tape over the cable and the connector.

    • Open up the lid with a spudger, and gently remove the ribbon cable.

    • Be careful because the ribbon cable is pasted tot the plate.

    • This ribbon cable is the connector from the ON/OFF switch.

  10. HP 250 G3 WiFi Card Replacement: étape 11, image 1 de 2 HP 250 G3 WiFi Card Replacement: étape 11, image 2 de 2
    • Remove the screw, and remove the ribbon cable from the connector.

    • The ribbon cable/connector is the touch pad/mouse connector.

  11. HP 250 G3 WiFi Card Replacement: étape 12, image 1 de 1
    • Remove the screw on the upper side of the laptop.

    • Remove the last screw (unfortunately, I do not have a picture of this, but you will see it on your laptop).

  12. HP 250 G3 WiFi Card Replacement: étape 14, image 1 de 3 HP 250 G3 WiFi Card Replacement: étape 14, image 2 de 3 HP 250 G3 WiFi Card Replacement: étape 14, image 3 de 3
    • Slide your iSesamo around the case as shown in picture 1 and 2, and go around the entire laptop.

    • You will hear clicks after using the iSesamo.

    • Lift the upper plate to reveal the motherboard.

  13. HP 250 G3 WiFi Card Replacement, removing main board: étape 15, image 1 de 3 HP 250 G3 WiFi Card Replacement, removing main board: étape 15, image 2 de 3 HP 250 G3 WiFi Card Replacement, removing main board: étape 15, image 3 de 3
    • Remove the two screws holding the main board to the plate (see pictures 2 and 3).

  14. HP 250 G3 WiFi Card Replacement, loose screws and cables to remove main board: étape 16, image 1 de 1
    • Use an IC extractor to remove the audio connector from the socket (sorry for the blurred picture).

  15. HP 250 G3 WiFi Card Replacement, removing LCD cable: étape 17, image 1 de 3 HP 250 G3 WiFi Card Replacement, removing LCD cable: étape 17, image 2 de 3 HP 250 G3 WiFi Card Replacement, removing LCD cable: étape 17, image 3 de 3
    • Use a spudge to remove the tape/sticker.

    • Be very gentle and careful with this step because the connector is a hard-to-remove ribbon cable with a bunch of small cables. Ripping one of them will damage the ribbon cable, and will cause bad or no screen.

    • It is recommended to use an IC extractor to remove the LCD connector (however, you can use two small flat-had screwdrivers, or tweezers to slide the connector out o the socket).

  16. HP 250 G3 WiFi Card Replacement, removing HDD: étape 18, image 1 de 2 HP 250 G3 WiFi Card Replacement, removing HDD: étape 18, image 2 de 2
    • Remove the two screws holding the HDD.

    • Slide out the HDD.

  17. HP 250 G3 WiFi Card Replacement, removing usb pcb: étape 19, image 1 de 3 HP 250 G3 WiFi Card Replacement, removing usb pcb: étape 19, image 2 de 3 HP 250 G3 WiFi Card Replacement, removing usb pcb: étape 19, image 3 de 3
    • Use a spudger to loosen the cable from the bottom plate.

    • The flat ribbon cable is pasted to the bottom plate, and the ribbon cable is soldered to the PCB.

  18. HP 250 G3 WiFi Card Replacement, removing the bad Wifi module.: étape 20, image 1 de 3 HP 250 G3 WiFi Card Replacement, removing the bad Wifi module.: étape 20, image 2 de 3 HP 250 G3 WiFi Card Replacement, removing the bad Wifi module.: étape 20, image 3 de 3
    • Remove the golden antenna cable from the socket. Be very careful, and use a spudger.

    • Remove the screw.

    • The WiFi module will jump up when the screw is removed. Slide the WiFi module out.

    • Wear gloves to avoid touching the antenna or the antenna sockets.

    • To install the new Wifi module, slide the new WiFi module in , push it down, and put the screw back in.

    • Attach the antenna back in.

  19. HP 250 G3 WiFi Card Replacement, removing main PVB: étape 21, image 1 de 3 HP 250 G3 WiFi Card Replacement, removing main PVB: étape 21, image 2 de 3 HP 250 G3 WiFi Card Replacement, removing main PVB: étape 21, image 3 de 3
    • In this case I did not remove the main PCB because then I had to remove the DC jack. It was a very breakable connector, and the wires are very thin. If you break one of them you cannot charge your laptop any more.

    • If the DC jack is damaged or broken in your laptop, remove the hinge instead (this is holding the DC power jack in place).

Conclusion

To reassemble your device, follow these instructions in reverse order.

10 autres ont terminé cette réparation.

Kevin D

Membre depuis le 05/02/14

7 294 Réputation

21 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 20

30 derniers jours : 68

Total : 11,422