Afficher :
Votes refusésToute personne ayant plus de 20 de réputation peut signaler les commentaires et contributions posant problème.
Afficher les détails
Rep : 1
Publié:
Ich habe Akku und Bildschirm meines Iphone SE 2016 ausgetauscht.
Beides funktioniert! Dafür aber nicht mehr der Einschalt-Knopf und der Lautsprecher.
Eigentlich ist alles richtig angeschlossen. Kann es sein, dass ich beim Zusammenbauen etwas kaputt gemacht habe? Hatte jmd. schon einen ähnlichen Fehler? Fehler-Analyse im Laden kostet 30 € - ich weiß nicht, ob sich das noch rentiert.
Danke für eure Hilfe!
Afficher les détails
Rep : 1
Publié:
Hallo,
ich habe Logitech schon kontaktiert, aber gerade ist der Ersatzteil bei Logitech aus. Weiß jemand wo ich den Artikel "993-001807" bestellen könnte?
Afficher les détails
Rep : 26,1k
Publié:
Hi
This issue is usually caused by a damaged screen or loose screen connector
You will most will most likely need to replace the screen but I would open it up first and try reseating the display connector by following this guide
Changement écran iPhone 4 (GSM/AT&T)
If reseating doesn’t work you will most likely need a display replacement which you can find liked below
https://www.replacebase.co.uk/iphone-4-r...
Hopefully this helps
Any questions please ask
Thanks:-)
Rep : 26,1k
Publié:
@TechVid
Your most welcome
You will most likely need a new screen:-)
Afficher les détails
Rep : 1
Publié:
come with me if you want to live
Afficher les détails
Rep : 1
Publié:
i bought an Warriors of rock guitar and when i play with it it Presses every Botton randomely. is there a way to fix it or should i throw it away?
it somehow fixed itself while i was opening it, i saw some cables touching that i separatet again then tryed it and it worked
Rep : 1
Publié:
it somehow fixed itself while i was opening it, i saw some cables touching that i separatet again then tryed it and it worked
Afficher les détails
Rep : 1
Publié:
This is a Product Number: K3N16UA
Description: HP Stream Notebook PC 13
Could not find this in the listing of notebook or laptop.
Ifixit gave a battery # I need to replace.
Is there any other battery in this Stream note book?
That I might need to change also?
Thnx
Rep : 460,3k
Publié:
Hi @craigdickson,
Just to verify that the battery is faulty in the Windows laptop, create a battery report.
When you have the report, check the Design Capacity value versus the Full Charge capacity value.
For a good new battery they should nearly be the same.
You can work out how far the battery has deteriorated by calculating the full charge value x 100 ÷ Design capacity value to find the percentage that it is charging to.
If the percentage drop is significant i.e. >20% from the Design Capacity value, contact the seller about a replacement
Don't know Apple products that much but have read that this program is very good to find out about the state of the battery .
Afficher les détails
Rep : 1
Publié:
My screen is asking for an unlock code. The unlock screen has changed and is now not accepting my code. It is telling me that I have 5 attempts left and then the phone will reset to factory settings. How can I get it unlocked????
Afficher les détails
Rep : 1
Publié:
Merge Outlook PST Application is a highly efficient program that merges multiple Outlook PST files into a single file. This innovative utility offers a cost-effective and fastest option to merge Outlook Contacts, Emails, Calendar, Journal, and other mail items into a single file without any loss in data. Any technical or non-technical user can easily operate the software because it has an attractive and user-friendly GUI interface. This software breaks the PST file in both ANSI and UNICODE format. Download the free demo version of the software.
Visit here:- http://www.sametools.com/merge/pst/
Afficher les détails
Rep : 306
Publié:
Rep : 1
Publié:
Get the website for fast and fluid money transfer experience on mobile only on cash app technical number.
Afficher les détails
Rep : 1,6k
Publié:
i'm talking about the pre-cut frame seals on the blue plastic, however, if there is advice that can be equally applied to tesa tape, it's welcome too.
i've read that after the screen is mated to the case it's advisable to use heat, or pressure or both to help the adhesive set.
for heat, there are heat guns, microwaveable bean/rice bags, heat tables, etc.
for pressure, there's heavy books, wood/C clamps or phone specific edge clamps.
my question is what is your recommendation for using heat and/or pressure to make the adhesive set better?
i don't have a heat table, but i do have a heat gun and a laser/infrared thermometer so i can't really dial in a temperature, but i can heat the phone and read surface temperatures. most heating advice is "until it's just too hot to touch" and i'd like something more quantifiable than that.
what temperature to you heat the phone to?
once heated, how long do you apply weight/pressure to the seal?
Thanks
Rep : 1
Publié:
For optimal adhesive setting, I recommend using heat and pressure in combination. If you don't have a heat table, using a heat gun is a viable option. While it's difficult to provide an exact temperature without a dial, aim to heat the phone until the surface temperature is comfortably warm to touch, but not excessively hot.
After heating the phone, apply weight or pressure to the seal for approximately 30 minutes to ensure proper adhesion. Heavy books, wood/C clamps, or phone-specific edge clamps are suitable tools for applying pressure during this period. This method helps promote a secure bond between the screen and the case. i have faced this issue while i was playing a game https://modlonely.com/
Oups ! J'ai changé d'avis.
Développer / Réduire
Réussite
Pour
Échec
Contre
Ouvrir l'aide
