When is a teardown guide coming?
Is a detailed disassembly guide coming any time soon?
Afficher :
Votes refusésToute personne ayant plus de 20 de réputation peut signaler les commentaires et contributions posant problème.
Afficher les détails
Rep : 1
Publié:
Is a detailed disassembly guide coming any time soon?
Afficher les détails
Rep : 61
Publié:
I managed to convince one of the sales people at Best buy to sell me the floor model of the Google pixel 7 pro 5G. Phones battery was dead at the time. Now that it's charged I see that I need the retail admin IT password to get into the developer options menu... Does anybody know this password? or Google's stock retail password? Maybe there are other ways, possibly ADB/Fastboot..? I would need step by step instructions/copy & paste commands if so
steven murray @stevenmurr79063
Rep : 1
Publié:
video on how to get full use out of the phone
ebay item 355248564648
Afficher les détails
Rep : 1
Publié:
What's Wrong With My Phone
Afficher les détails
Rep : 1
Publié:
I want to try and replace my A10 chip but I don’t feel like getting a new phone. Is there a way to replace it with a higher one?
Afficher les détails
Rep : 551
Publié:
Der kleine Plastikslot für Speicherkarten lässt sich nicht mehr, bzw. nur noch ein ganz kleines Stück herausziehen nachdem ich eine neue SD Karte ausprobiert habe.
Meine Vermutung ist, dass die Verriegelung der Karte im Slot sich gelöst hat (die Karte wird auch nicht von der Logo erkannt), und die Karte jetzt in die Seite vom Schacht gedrückt wird und sich deswegen verhakt hat.
Hat jemand eine Idee wie ich das Ding wieder rausbekommen könnte?
Afficher les détails
Rep : 1
Publié:
Must press the bar for the next page hard, and it doesn't "click" anymore.
Afficher les détails
Rep : 1
Publié:
Can a battery be checked or tested with a Fluke digital volt/ohm meter? If so what terminals can i check this at the USB connector of an itouch. Would the terminal connectors be the same for all generation?
Rep : 1
Publié:
Actually no power to the itouch and no communication with itunes. Tried just about everything to reset it and restore it. Still no response. I did take it apart and checked the voltage at the battery terminals and it was around .625 volts just over a half a volt. I even tried with the ipod USB connector connected. Still no change in voltage. My guess it's shorted out or has open circuit internally. Checking with a known good battery form my 1st gen itouch it should be around 3.6 volts. My other guess might be a shorted main board. Right now I'm in the process of elimination. Basic components first. By the way... Nice forum.
Afficher les détails
Rep : 97
Publié:
Hello, today I faced with a problem I never had before on an iPhone 6s. At first I was changing the lcd and everything was ok. Then my customer asked for a battery replacement for this phone. After installation of a new original battery phone got stuck on Apple logo. I tried to put back the old battery, but it also gets stuck... I am trying iTunes restore with dfu mode, but it shows me error (9). Does anyone got the same problem? Is there a problem in motherboard?
Afficher les détails
Rep : 763,7k
Publié:
@bruceallen78599 it's a TCL so no schematics and no help from the company. You said you have no power from the power supply to the LED connectors. This is a new power board or used? Did you also replace the main board? After all it is the main board which tells the power board to turn on the different circuits (simplified).You need to measure the voltages on the power connector where the main board connects too. If you take a couple of good pictures of all the boards separately as well as a pictures showing the complete backside of your TV. That way we can see all the boards and the interconnect cables. Ajout d'images à une question existante
Rep : 13
Publié:
Disconnected the T-con but nothing changes. The model is 65S425-CA
Afficher les détails
Rep : 13
Publié:
Will it connect wirelessly to my tablet?
Rep : 763,7k
Publié:
@nadinenorman no, it does not have bluetooth or wireless. The online I/O interface this printer has is a USB 2.0
Now, there may be some sort of external adapter you could use but that is only a guess. It would definitely not be plug-and-play :-)
Oups ! J'ai changé d'avis.
Développer / Réduire
Réussite
Pour
Échec
Contre
Ouvrir l'aide