Aller au contenu principal

P & V mode won't work

Error code: 0xA Blower error Dtc Code- 0xA0C5

0xA Blower pressure under limit Dtc Code - 0xA0C8

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0

1 commentaire:

olmstead check the blower. Let us know what model bed this is and what model blower it uses. Make sure there is no obstruction between the blower and the valve assembly.

par

Ajouter un commentaire

1 Réponse

this service manual is about the MOST complete and well written that I have ever seen. Half the cost of the bed must be in it. However, there is NO reference to any of those codes. There is only LED blink codes. So, do you have something different?

Otherwise, there are 6 pressure sensors and you will have to figure out which one is reading low and go from there.

Cette réponse est-elle utile ?

Indice 0
Ajouter un commentaire

Ajouter une réponse

olmstead99 sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 4

7 derniers jours : 5

30 derniers jours : 11

Total : 140