@devangpate23081 that could easily be caused by an issue with the master switch assembly or a bad connector. Here are the [document|35390] instructions for checking the switches, relay and connectors. You can use that to check the individual components, measure voltages and jump the switches to test the components.
To remove the master switch:
(a) Remove the front door armrest base cover lower.
(b) Remove the screw.
(c) Using a screwdriver, remove the power window regulator master switch assembly then disconnect the connector.[br]
Here is the schematic for the power windows
[image|3272174]
[image|3272175]
[image|3272176]