Astro A40 TR Motherboard Replacement
Ce dont vous avez besoin
-
-
To access the speakers you need to disassemble the earpiece. First remove the foam ear piece by simply pinching the padding and pulling lightly until the magnets disengage.
-
-
-
-
Locate the three small screws under the speaker. Use the J00 Philips Driver to remove them.
-
-
-
Remove the three screws in the photo with the J00 driver bit, and pull the headphone jack away from the assembly.
-
-
-
Un-solder the two wires circled, at this point the entire assembly can be removed from the speaker and the remainder of the device.
Where can i buy a replacement port/board?
Where can a replacement jack purchased
-
-
-
Pull the motherboard off of the jack and replace it with a new one by re-soldering the wires.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.
1 commentaire de tutoriel
Hi I hope you can answer ASAP
Why did you replace that?
I’m asking this cuz i got a problem with mines, i insert the mic and didn’t work, its like a false