BLU Advance 4.0 Rear Case Disassembly
Ce dont vous avez besoin
Outils
-
-
With the back camera on the top side and facing you, find a notch on the bottom right side of the phone.
-
Unclip the cover by raising it up from the notch and sliding a flat rigid tool along the edge.
-
-
-
Remove the battery.
-
Remove 3 screws from each side with a Phillips 00 screwdriver.
-
Unclip the screen by sliding a flat rigid tool between the black and the blue side-band.
-
Pop off the blue side-band to be exposed to the motherboard.
-
-
-
Remove 2 black plastic buttons from each side, exposing metallic padding.
-
Gently pry the metallic padding off the motherboard with a flat rigid tool.
-
Carefully separate the clip-on tabs while lifting the motherboard away from the screen.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.