/
Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
S'inscrire
Connexion
Rejoignez la plus grande communauté de réparation au monde
Pièces
TutorielsRéponses
Traduire
Bionaire BAP 600 Outer Shell Replacement

Bionaire BAP 600 Outer Shell Replacement

Nick Miller

Nick Miller et 4 autres contributeurs

Dernière mise à jour le February 21, 2025

Aucune estimation
Difficile
Étudiant en action
Problème de balise
Meilleure introduction
Détails manquants

Introduction

Passez à l'étape 1

This guide will show the user how to remove the outer casing of the Bionaire BAP 600.

Ce dont vous avez besoin

Outils

Afficher plus…

  1. Bionaire BAP 600 Outer Shell Replacement, Base/Intake: étape 1, image 1 de 1

    • Rotate the base counterclockwise, supporting the top with your opposite hand.

    Traduire

  2. Bionaire BAP 600 Outer Shell Replacement: étape 2, image 1 de 1

    • Pull the base away from the housing to expose the air filter.

    Traduire

  3. Bionaire BAP 600 Outer Shell Replacement, Air Filter: étape 3, image 1 de 1

    • Grab the edge of the filter housing and pull the filter away from the rest of the device.

    Traduire

  4. Bionaire BAP 600 Outer Shell Replacement: étape 4, image 1 de 1

    • Gently pull apart each fold of the filter to check for abrasions or other anomalies. Clean with a dust rag if necessary.

    Traduire

  5. Bionaire BAP 600 Outer Shell Replacement, Outer Shell: étape 5, image 1 de 1

    • Remove all 6 screws from the LED housing.

    Traduire

  6. Bionaire BAP 600 Outer Shell Replacement: étape 6, image 1 de 1

    • After the 6 screws are removed, remove the LED housing from the bottom of the device by lifting it off.

    Traduire

  7. Bionaire BAP 600 Outer Shell Replacement: étape 7, image 1 de 1

    • Using two fingers lift the translucent LED cover from the inside. Repeat this step for the second tab.

    Traduire

  8. Bionaire BAP 600 Outer Shell Replacement: étape 8, image 1 de 1

    • After lifting 45 degrees, pull the translucent tab away from thee housing. Repeat this step for the second LED cover.

    Traduire

  9. Bionaire BAP 600 Outer Shell Replacement: étape 9, image 1 de 1

    • Locate the tab about 1 inch below the top vent. Insert a flat tool laterally past the tab and press in toward the center of the device. As the tab is being held down, pull the two halves of the egg apart to keep the shell open.

    Traduire

  10. Bionaire BAP 600 Outer Shell Replacement: étape 10, image 1 de 1

    • Locate the second tab on the back of the device approximately 2 inches above the power cord.

    • Insert the flat tool at a slight angle toward the left of the power cord. Depress the tab and pull the two halves of the shell apart.

    Traduire

  11. Bionaire BAP 600 Outer Shell Replacement: étape 11, image 1 de 1

    • Locate the bottom tab on the front side at the same height as the bottom tab on the back side.

    • Depress the tab using a flat tool at a slight angle and pull the halves apart.

    Traduire

  12. Bionaire BAP 600 Outer Shell Replacement: étape 12, image 1 de 1

    • Locate the last tab about one inch below the top on the front side.

    • Depress the tab using the flat tool at a slight angle and finish pulling the removable half of the shell off.

    Traduire

  13. Bionaire BAP 600 Outer Shell Replacement: étape 13, image 1 de 1

    • Locate the screw housing opposite of the control board, and remove the screw.

    Traduire

  14. Bionaire BAP 600 Outer Shell Replacement: étape 14, image 1 de 1

    • Locate the control board and grab it by the top and bottom firmly. Pull the board straight out being careful not to flex the circuit while removing.

    Traduire

  15. Bionaire BAP 600 Outer Shell Replacement: étape 15, image 1 de 1

    • Locate the screw that was being hidden by the control board and remove it to release the second half of the shell.

    Traduire

  16. Bionaire BAP 600 Outer Shell Replacement: étape 16, image 1 de 1

    • Remove the released half of the shell to finish removing the entire outer shell of the device.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Nick Miller

Membre depuis le 10/26/16

167 Réputation

3 tutoriels rédigés

Badges: 8

+ 5 badges supplémentaires

Équipe

IUPUI, Team 4-4, Baechle Fall 2016 Membre de l'équipe IUPUI, Team 4-4, Baechle Fall 2016

IUPUI-BAECHLE-F16S4G4

5 membres

7 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 8

Total : 686