Introduction

Work area should be lint free, clean and well lit.

Pièces

Aucune pièce nécessaire.

Open the rear panel to expose the chassis assembly.
  • Open the rear panel to expose the chassis assembly.

  • Remove the battery.

Ajouter un commentaire

Use a small non-marring plastic opening tool to remove the lower rear cover.
  • Use a small non-marring plastic opening tool to remove the lower rear cover.

Ajouter un commentaire

  • Use a T6 Torq screw to loosen and remove the six screws from the chassis as shown.

Ajouter un commentaire

  • Remove the midframe from the phone.

Ajouter un commentaire

  • Remove the remaining core assembly from the case, by carefully prying the side release tabs.

Ajouter un commentaire

  • Gently pry the side release tabs to lift the flexing keypad from the frame.

  • The navigation ball may come loose at this point. Set it aside with the keypad for reassembly.

Ajouter un commentaire

  • Gently lift the motherboard.

  • Locate the screen's ribbon cable underneath the motherboard, and detach it from the phone.

Ajouter un commentaire

  • Carefully pry at the sides of the screen until the display assembly is free. Remove the display from the motherboard unit.

  • Insert the replacement display assembly and reverse the directions to re-assemble.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autre(s) ont terminé cette réparation.

Renae Bishop

Membre depuis le 07/09/2011

66 Réputation

4 tutoriels rédigés

Équipe

Cuesta, Team 1-3, Zipperian Fall 2011 Membre de l'équipe Cuesta, Team 1-3, Zipperian Fall 2011

CUESTA-ZIPPERIAN-F11S1G3

3 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 3,995