Aller au contenu principal

Canon PowerShot SD1400 IS User Interface Panel Replacement

Ce dont vous avez besoin

  1. Canon PowerShot SD1400 IS User Interface Panel Replacement, User Interface Panel: étape 1, image 1 de 3 Canon PowerShot SD1400 IS User Interface Panel Replacement, User Interface Panel: étape 1, image 2 de 3 Canon PowerShot SD1400 IS User Interface Panel Replacement, User Interface Panel: étape 1, image 3 de 3
    • Remove the four 2.0 mm Phillips screws of the camera using the J00 bit from the 54-bit Driver Kit. There are two screws on both sides.

  2. Canon PowerShot SD1400 IS User Interface Panel Replacement: étape 2, image 1 de 1
    • Remove the 4.0 mm Phillips screw located on the bottom of the camera.

  3. Canon PowerShot SD1400 IS User Interface Panel Replacement: étape 3, image 1 de 1
    • Remove the front face panel of the camera by hand using firm pressure.

    • If one point of the face is stuck to the body, check if there is a screw preventing the front face from coming off.

  4. Canon PowerShot SD1400 IS User Interface Panel Replacement: étape 4, image 1 de 1
    • Remove the rear panel of the camera by hand using firm pressure.

  5. Canon PowerShot SD1400 IS User Interface Panel Replacement: étape 5, image 1 de 1
    • Remove the user interface panel by hand. The panel may fall out on its own, this is normal.

    • Replace the user interface panel by setting it in position.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Braxton Beal

Membre depuis le 01/30/18

696 Réputation

3 tutoriels rédigés

Équipe

Baylor, Team S1-G3, Johnson Spring 2018 Membre de l'équipe Baylor, Team S1-G3, Johnson Spring 2018

BU-JOHNSON-S18S1G3

3 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 240