Canon PowerShot SD700 Outside Case Replacement

Dernière mise à jour le January 9, 2025

5 - 10 minutes

Modérée

Introduction

This guide will help you remove and replace the outside case of the Canon PowerShot SD700. Follow the step-by-step instructions to remove the outside case of your Canon PowerShot SD700. You will need Phillips #00 screwdriver to complete the steps throughout the guide.

Ce dont vous avez besoin

Outils

Phillips #00 Screwdriver

Étape 1 Outside Case

Canon PowerShot SD700 Outside Case Replacement, Outside Case: étape 1, image 1 de 1

Turn off the camera by pressing the power button above the LCD screen.

Modifier

Étape 2

Remove the two small screws on the bottom of the camera using a Phillips #00 screwdriver.

Modifier

Étape 3

Use a Phillips #00 screwdriver to remove the two small screws on the right side of the camera.

Modifier

Étape 4

Use a Phillips #00 screwdriver to remove the screw on the left of the camera under the A/V out digital label.

Modifier

Étape 5

Use a Phillips #00 screwdriver to remove the screw on the bottom of the camera near the battery and memory card slots.
This screw will be longer than the rest of the screws.

Modifier