/
Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
S'inscrire
Connexion
Rejoignez la plus grande communauté de réparation au monde
Canon Powershot SX30 IS LCD Panel Front Cover Replacement

Canon Powershot SX30 IS LCD Panel Front Cover Replacement

Ellis DeVoe

Ellis DeVoe et 3 autres contributeurs

Dernière mise à jour le June 23, 2015

10 minutes
Facile
Meilleure introduction

Ce dont vous avez besoin

Outils

  1. Canon Powershot SX30 IS LCD Panel Front Cover Replacement, LCD Panel Rear Cover: étape 1, image 1 de 1

    • Turn the camera so the back of it is facing you.

    • Pull the LCD screen towards you in order to open it,

    Traduire

  2. Canon Powershot SX30 IS LCD Panel Front Cover Replacement: étape 2, image 1 de 2 Canon Powershot SX30 IS LCD Panel Front Cover Replacement: étape 2, image 2 de 2

    • Unscrew the two 3 mm screws shown on the left side of the LCD screen panel using a Phillips screwdriver.

    Traduire

  3. Canon Powershot SX30 IS LCD Panel Front Cover Replacement: étape 3, image 1 de 3 Canon Powershot SX30 IS LCD Panel Front Cover Replacement: étape 3, image 2 de 3 Canon Powershot SX30 IS LCD Panel Front Cover Replacement: étape 3, image 3 de 3

    • Unscrew the two 3 mm screws shown on the right side of the LCD screen panel.

    Traduire

  5. Canon Powershot SX30 IS LCD Panel Front Cover Replacement: étape 4, image 1 de 2 Canon Powershot SX30 IS LCD Panel Front Cover Replacement: étape 4, image 2 de 2

    • Using the plastic opening tool, remove the rear case of the front LCD cover.

    Traduire

  6. Canon Powershot SX30 IS LCD Panel Front Cover Replacement: étape 5, image 1 de 1

    • Pull off the back panel of the LCD screen and the plastic wire protector. Then replace the back panel.

    Traduire

  7. Canon Powershot SX30 IS LCD Panel Front Cover Replacement, LCD Panel Front Cover: étape 6, image 1 de 1

    • Unscrew the 2mm screw on the outer edge of the panel

    Traduire

  8. Canon Powershot SX30 IS LCD Panel Front Cover Replacement: étape 7, image 1 de 2 Canon Powershot SX30 IS LCD Panel Front Cover Replacement: étape 7, image 2 de 2

    • Unscrew the 3mm screw on the inner edge of the panel. This is easily done by rotating the screen to be perpendicular to the body of the camera, but be careful not to damage the wires or the circuit board.

    • The panel will fall right off

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Ellis DeVoe

Membre depuis le 04/14/15

580 Réputation

5 tutoriels rédigés

Badges: 9

+ 6 badges supplémentaires

Équipe

Cal Poly, Team 5-12, Maness Spring 2015 Membre de l'équipe Cal Poly, Team 5-12, Maness Spring 2015

CPSU-MANESS-S15S5G12

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 8

30 derniers jours : 8

Total : 607