Lay the laptop flat with its bottom up exposing the screws holding it together. Unscrew these eight screws with a JIS #1 screwdriver and put them aside.
  • Lay the laptop flat with its bottom up exposing the screws holding it together. Unscrew these eight screws with a JIS #1 screwdriver and put them aside.

  • Use your screw driver to pry off the plastic cover exposing the last screw in the middle.

  • Remove the screw and save the plastic cover to put back on later when done.

Ajouter un commentaire

Remove this one screw with the JIS #1 screwdriver in order to take of the holding plate for the wifi card adapter. Then remove the adapter.
  • Remove this one screw with the JIS #1 screwdriver in order to take of the holding plate for the wifi card adapter. Then remove the adapter.

  • Unscrew these two screws with a JIS#1 screwdriver.

  • Peel back the two metal brackets to remove the screen.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Michael Kendziora

Membre depuis le 14/02/2018

775 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team S6-G4, Eyestone Spring 2018 Membre de l'équipe USF Tampa, Team S6-G4, Eyestone Spring 2018

USFT-EYESTONE-S18S6G4

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 59