Pièces

Aucune pièce nécessaire.

Slide and hold the battery-bay latch release on the bottom of the computer, and then lift the battery from the bay.
  • Slide and hold the battery-bay latch release on the bottom of the computer, and then lift the battery from the bay.

Ajouter un commentaire

loosen the captive screws on the memory module cover, and then remove the memory module cover.
  • loosen the captive screws on the memory module cover, and then remove the memory module cover.

Ajouter un commentaire

  • NOTICE: To prevent damage to the memory module connector, do not use tools to spread the memory-module securing clips.

  • NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

  • Use your fingertips to carefully spread apart the memory-module securing clips on each end of the memory module connector until the module pops up.

    • Remove the module from the connector.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Membre depuis le 28/02/2018

35 317 Réputation

408 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

15 membres

917 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 13