Disassembling Logitech UE MegaBoom 3 General Disassembly

Dernière mise à jour le December 29, 2023

1 - 5 minutes

Très facile

Conditions préalables uniquement

Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Introduction

This is a general disassembly guide that is used to access the different components that make up the speaker.

Outils

To access all internal components, first flip the speaker upwards to where you can see the base.
Place your blue iFixit opening picks inside the gap between the speaker and the base to act as a lever when opening the speaker.

Using the flat head #4.5 screw driver, carefully lever and rotate the driver around the edge of the speaker to enlarge the gap further.
Here, it is ideal to use a spudger as opposed to the flathead screwdriver, however, the flathead makes it so much easier to pry off the cap.
Pry off the base of the speaker and remove the end cap.