Epson PowerLite 83+ Lamp Replacement

Billy Fox et 3 autres contributeurs

Dernière mise à jour le May 26, 2022

10 - 25 minutes

Facile

Tutoriel étudiant vedette

Introduction

Passez à l'étape 1

The lamp is a major component in the Epson PowerLite 83+ projector and could be the cause of multiple issues. The process of replacing the lamp is relatively basic as it just involves removing the lamp cover and removing the lamp from within the case. This process can also be used for re-seating the lamp if it is needed.

Before beginning this repair, be sure to to turn off the projector and unplug the device from the power source. Allow the projector to cool for an hour if it has been just been used recently as well.

Ce dont vous avez besoin

Pièces

V13H010L42 Projector Lamp/Bulb with Housing
Sale price $48.99

Outils

Phillips #2 Screwdriver
Lien d'affiliation
Disponible à la vente sur Amazon
Afficher

iFixit touche une commission lorsque vous achetez par l'intermédiaire de ces liens.

Étape 1 Lamp

Epson PowerLite 83+ Lamp Replacement, Lamp: étape 1, image 1 de 1

Turn off and unplug the projector.
Allow the projector to cool for an hour before performing maintenance on it.

Modifier

Étape 2

Remove the 6 mm Phillips #2 screw securing the lamp cover.

Modifier

Étape 3

Epson PowerLite 83+ Lamp Replacement: étape 3, image 3 de 3

Apply gentle pressure to the end of the lamp cover.
Pull the lamp cover towards the end of the projector.
When the cover is released, pull the cover straight up off of the projector to reveal the lamp.

Modifier

Étape 4

Loosen the two captive Phillips #2 screws securing the lamp.
Captive screws cannot be removed. They are secured to the lamp itself with retaining rings and will be removed along with the lamp.

Modifier