Réparez vos affaires Communauté Boutique

HP Elite x2 G1 1012 Display Replacement

Introduction

Use this guide to replace and / or adjust the screen of the HP Elite x2 G1.

Ce dont vous avez besoin

  1. HP Elite x2 G1 1012 Display Replacement, Display: étape 1, image 1 de 1

    • Be sure to power off and unplug your device before you begin your repair.

    • With the screen face down, lift up the stand as far as it goes.

    • Make sure not to force it past the resting point.

    Traduire

  2. HP Elite x2 G1 1012 Display Replacement: étape 2, image 1 de 2 HP Elite x2 G1 1012 Display Replacement: étape 2, image 2 de 2

    • Use a T5 driver to remove the six screws on the back of the tablet.

    Traduire

  4. HP Elite x2 G1 1012 Display Replacement: étape 3, image 1 de 1

    • After removing the screws, delicately close the stand.

    • Flip the tablet on its back so that the screen is facing up.

    Traduire

  5. HP Elite x2 G1 1012 Display Replacement: étape 4, image 1 de 2 HP Elite x2 G1 1012 Display Replacement: étape 4, image 2 de 2

    • Use the suction cup to carefully separate the screen from the device. Pull upwards with a fluid and smooth motion.

    • Do not lift too fast! There will still be wires connecting the screen to the device. Make sure they are not tampered with.

    Traduire

  6. HP Elite x2 G1 1012 Display Replacement: étape 5, image 1 de 3 HP Elite x2 G1 1012 Display Replacement: étape 5, image 2 de 3 HP Elite x2 G1 1012 Display Replacement: étape 5, image 3 de 3

    • Remove the tape on the lower left side of the screen.

    • Underneath the tape, disconnect the LCM cable, the larger wire that was underneath the tape, from the back of the tablet screen.

    Traduire

  7. HP Elite x2 G1 1012 Display Replacement: étape 6, image 1 de 2 HP Elite x2 G1 1012 Display Replacement: étape 6, image 2 de 2

    • Disconnect the flex cable from the device using the spudger.

    • Remove the Display Assembly from the device.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Colin Mika

Membre depuis le 04/19/18

943 Réputation

6 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

Cal Poly, Team S24-G7, Maness Spring 2018 Membre de l'équipe Cal Poly, Team S24-G7, Maness Spring 2018

CPSU-MANESS-S18S24G7

4 membres

6 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 30

Total : 3,269