HP Envy 23-d060qd TouchSmart Speaker Replacement

Dernière mise à jour le December 28, 2017

15 minutes

Modérée

Introduction

My computer won't play audio even though I've checked all of the connections. How can I have a dance party without any audio? Luckily the party starts in 15 minutes so I have time to replace the speakers.

Ce dont vous avez besoin

Outils

iFixit touche une commission lorsque vous achetez par l'intermédiaire de ces liens.

Étape 1 Back Panel

HP Envy 23-d060qd TouchSmart Speaker Replacement, Back Panel: étape 1, image 1 de 1

Use your hands to unclip the plastic snaps on the back panel of the device.

Modifier

Étape 2

Remove the three 11.5mm PH2 screws from the back panel.
The screws will not fall out of the back panel, but they will unscrew to release the back panel.

Modifier

Étape 3

Now, take the back panel off by pulling at it gently with your hands.

Modifier

Étape 4 Speakers

HP Envy 23-d060qd TouchSmart Speaker Replacement, Speakers: étape 4, image 1 de 1

Remove the receiver for the keyboard and mouse with your hands.

Modifier

Étape 5

Remove the four 17.5mm T15 screws from the speakers.
Remove the five 7.5mm T15 screws from the cover plate.
Remove the cover plate with your hands.

Modifier

Étape 6

Disconnect the two speaker connections from the motherboard with your hands. Use your hands to gently pull the plastic piece at the ends of the wires.
Be gentle when disconnecting any wired connections. Pulling on the wires can damage them.

Modifier

Étape 7

Remove the speakers from the computer, and if needed, separate by disconnecting the wires between them.
Be gentle when separating wired connections. Pulling on the wires can damage them.

Modifier