Introduction

The grille is the part of the microphone that you speak into. Keeping the grille clean ensures that your sound quality is at its best.

Pièces

Aucune pièce nécessaire.

Hold the microphone just below the grille with one hand while using your other hand to rotate the grille clockwise to remove.
  • Hold the microphone just below the grille with one hand while using your other hand to rotate the grille clockwise to remove.

Ajouter un commentaire

Completely unscrew the grille and slide it off of the top of the microphone. The unprotected microphone is delicate, so place it somewhere safe while you follow the next steps.
  • Completely unscrew the grille and slide it off of the top of the microphone. The unprotected microphone is delicate, so place it somewhere safe while you follow the next steps.

Ajouter un commentaire

  • Put two drops of dish soap into a cup.

  • Add water to cup until half full.

Ajouter un commentaire

  • Place the grille in the solution of soap and water.

  • Let the grille soak for half an hour.

Ajouter un commentaire

  • Remove the grille from the cup and rinse it with cold water.

  • Allow the grille to air dry.

  • Make sure the grille and the foam inside it are completely dry before placing it back on the microphone.

Carefully remove the THIN foam filter Inside the grill. Wash this in the 2 drops of Dawn water solution.

Gently rinse in cool running water, blot dry and allow to dry. Reinstall into the grill after they both have dried.

Doug - Réponse

Ligne d'arrivée

5 autre(s) ont terminé cette réparation.

nat coll

Membre depuis le 27/09/2012

366 Réputation

14 tutoriels rédigés

Équipe

Cal Poly, Team 7-53, Forte Fall 2012 Membre de l'équipe Cal Poly, Team 7-53, Forte Fall 2012

CPSU-FORTE-F12S7G53

5 membres

18 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 8

7 derniers jours : 48

30 derniers jours : 121

Total : 5,733