Aller au contenu principal

Introduction

Follow this guide replace the LED light of a microlight.

Pièces

Aucune pièce spécifiée.

  1. Open the case by inserting the plastic opening tool into the seam of the device. Open the case by inserting the plastic opening tool into the seam of the device.
    • Open the case by inserting the plastic opening tool into the seam of the device.

  2. Place the plastic opening tool below the LED lamp and push away from the device until you hear a click. Continue to remove the LED lamp the with your fingers. Continue to remove the LED lamp the with your fingers.
    • Place the plastic opening tool below the LED lamp and push away from the device until you hear a click.

    • Continue to remove the LED lamp the with your fingers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Jennifer Tabadero

Membre depuis le 09/09/2014

508 Réputation

3 tutoriels rédigés

Équipe

CSU Fullerton, Team 2-1, Bruce Fall 2014 Membre de l'équipe CSU Fullerton, Team 2-1, Bruce Fall 2014

CSUF-BRUCE-F14S2G1

3 membres

3 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 12

Total : 563