Nokia 2630b Back Case Replacement

Eric et 5 autres contributeurs

Dernière mise à jour le January 20, 2025

Aucune estimation

Modérée

A besoin de meilleures images

Puces !

Texte bizarre

Problème de balise

Étapes manquantes

Découpez pour améliorer

Photos d’action

Détails manquants

Introduction

Passez à l'étape 1

In this guide, we show how to unscrew and remove the back case of the Nokia 2630b. This enables access to the motherboard, antenna, and LCD screen of the phone.

Ce dont vous avez besoin

Outils

T5 Torx Screwdriver

Étape 1 Battery Case

Nokia 2630b Back Case Replacement, Battery Case: étape 1, image 1 de 2

Nokia 2630b Back Case Replacement, Battery Case: étape 1, image 2 de 2

Press each release button on either side of the battery cover and simultaneously remove the battery cover from the phone.

Modifier

Étape 2

Pull the battery out of the phone with your fingers.

Modifier

Étape 3 Screen / Front Case

Nokia 2630b Back Case Replacement, Screen / Front Case: étape 3, image 1 de 1

Remove the two screws on either side of the battery case using the microscrewdriver using the T5 bit
The T5 bit has a star shaped end and has "T5" engraved on the side of the bit for easy identification
NOTE: Keep the screws in a safe place while you continue working.

Modifier

Étape 4

Nokia 2630b Back Case Replacement: étape 4, image 3 de 3

Separate the front case from the back case using the iPod opener
NOTE: The keypad is a loose piece and may fall out

Modifier

Étape 5

Remove screws using the same T5 screw bit to release the computer chip from the case
NOTE: Keep the screws in a safe place while you continue working

Modifier

Étape 6

Carefully lift the black frame off the screen with your fingers

Modifier

Étape 7

Carefully remove the computer chip and screen out of the black case with your fingers

Modifier

Étape 8

The screen is attached to the motherboard by an orange ribbon
Carefully detach the ribbon from the motherboard using your fingers

Modifier

Étape 9

Reattach new screen by connecting the orange ribbon to the computer chip

Modifier

Étape 10

Place computer chip and screen back into black case

Modifier

Étape 11

Place black frame back over screen

Modifier

Étape 12

Carefully place keypad back in place

Modifier

Étape 13

Snap the front case back in place with the bottom case with your fingers

Modifier

Étape 14

Reassemble screws with microscrewdriver

Modifier

Étape 15

Slide battery back into place

Modifier

Étape 16

Snap battery cover back into place

Modifier

Étape 17 Back Case

Nokia 2630b Back Case Replacement, Back Case: étape 17, image 1 de 2

Nokia 2630b Back Case Replacement, Back Case: étape 17, image 2 de 2

Locate the four screws that secure the back case to the rest of the phone.
Unscrew all four screws using a "T-5" star shaped screw driver, turning counter-clockwise.

Modifier

Étape 18

Nokia 2630b Back Case Replacement: étape 18, image 3 de 3

DO NOT PULL APART! There is a wire attaching the speaker to the rear case. It is very important to NOT sever this connection. Because of this, the rear case does not completely detach from the rest of the phone.
Holding the rear case, applying pressure to the back of the phone near the location of the battery in order to separate the two components.

Modifier