Aller au contenu principal

Introduction

If the epilator is plugged in and receiving power, but still will not turn on, one of the internal components may be broken. This guide will help you remove a broken motor. It should take no more than 30 seconds to complete this guide.

Pièces

  1. Remove the head by pushing it to  the right. Remove the head by pushing it to  the right. Remove the head by pushing it to  the right.
    • Remove the head by pushing it to the right.

  2. Use a metal spudger to pry open the casing. Caution: The epilator's internal components could be damaged if you shove the spudger in too far.
    • Use a metal spudger to pry open the casing.

    • Caution: The epilator's internal components could be damaged if you shove the spudger in too far.

  3. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  4. Pull the plastic casing apart with your hands.
    • Pull the plastic casing apart with your hands.

    • The plastic tab connecting the cover is likely going to break when you pull the device apart. This will not affect the operation of the epilator.

  5. Remove the components. Remove the components.
    • Remove the components.

  6. Hold the motor with the gears face away from you. Gently push the motor out with your thumbs. Gently push the motor out with your thumbs.
    • Hold the motor with the gears face away from you.

    • Gently push the motor out with your thumbs.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Madeline Casalino

Membre depuis le 08/10/2018

277 Réputation

3 tutoriels rédigés

Équipe

Marist, Team S1-G1, Chaterdon Fall 2018 Membre de l'équipe Marist, Team S1-G1, Chaterdon Fall 2018

MARS-CHATERDON-F18S1G1

3 membres

4 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 3

7 derniers jours : 6

30 derniers jours : 24

Total : 163