Philips TAS7505 Outer Shell Disassembly

Joseph Hernandez et 4 autres contributeurs

Dernière mise à jour le December 27, 2022

6 minutes

Modérée

Introduction

If you want to access the inside of this speaker, we need to take off the outer shell first. This is a step-by-step guide that shows how to remove the outer shell of the Philips TAS7505.

Ce dont vous avez besoin

Outils

Étape 1 Philips TAS7505 Outer Shell Disassembly

Philips TAS7505 Outer Shell Disassembly, Philips TAS7505 Outer Shell Disassembly: étape 1, image 1 de 2

Philips TAS7505 Outer Shell Disassembly, Philips TAS7505 Outer Shell Disassembly: étape 1, image 2 de 2

Make sure the speaker is turned off before you begin the disassembly.
Turn the speaker upside down. You will see a rubber base. Use an opening tool to lift up the sides to expose the screws.

Traduire

Étape 2

Philips TAS7505 Outer Shell Disassembly: étape 2, image 3 de 3

There will be 4 exposed screws. Make sure to use the Phillips #0 Screwdriver.
When the screws are removed, you can use an opening tool to take off the plastic cover.

Traduire

Étape 3

Philips TAS7505 Outer Shell Disassembly: étape 3, image 3 de 3

Now that you have removed this cover, there is another cover. This cover has a total of 9 screws that can be removed with a Philips #0 screwdriver.
Once all these screws are removed, you can take off the cover

Traduire

Étape 4

Philips TAS7505 Outer Shell Disassembly: étape 4, image 3 de 3

You can now see the inside of the speaker but you aren't done yet.
Remove both rubber stands that hold up the device horizontally (one of these stands is a cover for the USB ports).

Traduire