Pioneer Elite PRO-RO6U Control Panel Circuit Board Replacement

Dernière mise à jour le April 13, 2018

25 - 30 minutes

Modérée

Introduction

A faulty or defective front control panel may cause buttons on the media receiver to be unresponsive. Replacing the circuit board should resolve issues with the front controls and buttons.

Ce dont vous avez besoin

Outils

Afficher plus…

Étape 1 Control Panel Circuit Board

Pioneer Elite PRO-RO6U Control Panel Circuit Board Replacement, Control Panel Circuit Board: étape 1, image 1 de 1

Remove the two 6.4 mm Phillips screws on each side of the device's casing.

Modifier

Étape 2

Remove the two 6.5 mm Phillips screws on the back of the device casing.

Modifier

Étape 3

Grip the front panel in one hand and the back of the casing in the other. Pull the casing back, and slide it up and away from the inner box.

Modifier

Étape 4

Unlatch the three plastic connectors on the top of the receiver that hold the front panel to the device casing.

Modifier

Étape 5

The connectors on the bottom of the device may be very stiff and could require the use of a plastic prying tool.
Carefully flip the device over and unlatch the three plastic connectors that hold the front panel to the bottom of the device casing.

Modifier