Aller au contenu principal
PowerLead Puto PLD003 Side Panel Replacement

PowerLead Puto PLD003 Side Panel Replacement

Justin Tew

Justin Tew et 5 autres contributeurs

Dernière mise à jour le June 30, 2021

5 minutes
Modérée

This guide will show you how to remove the PowerLead Puto PLD003 side panel. The removal of the side panel is necessary, in order to, replace most parts.

Ce dont vous avez besoin

Outils

  1. PowerLead Puto PLD003 Side Panel Replacement, Side Panel: étape 1, image 1 de 1
    • Slide the battery eject button open to release the battery door.

  2. PowerLead Puto PLD003 Side Panel Replacement: étape 2, image 1 de 1
    • With the battery door open, carefully remove all four 5 mm Phillips #1 screws.

  3. PowerLead Puto PLD003 Side Panel Replacement: étape 3, image 1 de 1
    • Rotate the camera so that the underside is facing up.

    • Remove the four 5 mm Phillips #1 screws.

  4. PowerLead Puto PLD003 Side Panel Replacement: étape 4, image 1 de 1
    • Place the camera on a flat surface, with its underside facing you.

    • Gently pull up on the side panel to remove it from the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Justin Tew

Membre depuis le 03/31/16

767 Réputation

7 tutoriels rédigés

0 commentaires de tutoriel

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 202