Protocol Dronium One Landing Gear Replacement
10 - 20 minutes
Modérée
Introduction
Passez à l'étape 1This guide will walk you through the simple steps to replace the landing gears to help your drone land and fly properly.
Ce dont vous avez besoin
Outils
-
-
Remove the eight 5.2mm screws located on the drone base using a Phillips 00 screwdriver with a thin end.
-
-
Presque terminé !
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Équipe
USF Tampa, Team S2-G5, Sullivan Spring 2017 Membre de l'équipe USF Tampa, Team S2-G5, Sullivan Spring 2017
USFT-SULLIVAN-S17S2G5
4 membres
5 tutoriels rédigés
