/
Mon établi

Accédez rapidement aux tutoriels, aux pièces et aux réponses correspondant à vos appareils

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
S'inscrire
Connexion
Rejoignez la plus grande communauté de réparation au monde
Pièces
TutorielsRéponses
Modifier
Repairing HTC Wildfire S broken screen

Repairing HTC Wildfire S broken screen

Mikey Willbiscuit

Mikey Willbiscuit et un autre contributeur

Dernière mise à jour le October 4, 2013

Aucune estimation
Modérée
Texte bizarre
A besoin de meilleures images
Tutoriel réalisé par la communauté
Meilleure introduction

Ce dont vous avez besoin

Outils

Afficher plus…

  1. Repairing HTC Wildfire S broken screen, broken screen: étape 1, image 1 de 1

    • First remove the rear case/battery cover

    Modifier

  2. Repairing HTC Wildfire S broken screen: étape 2, image 1 de 1

    • Remove the battery.

    • Remove the two T5 Torx screws.

    • Prise off the lower casing towards the right in the picture, taking care not to break the two tabs

    Modifier

  3. Repairing HTC Wildfire S broken screen: étape 3, image 1 de 1

    • Remove the two further T5 torx screws

    • Remove the three Phillips #00 screws.

    Modifier

  4. Repairing HTC Wildfire S broken screen: étape 4, image 1 de 1

    • Now carefully prise off the case all round and it will detach completely

    Modifier

  5. Repairing HTC Wildfire S broken screen: étape 5, image 1 de 1

    • Prise up this connector

    Modifier

  6. Repairing HTC Wildfire S broken screen: étape 6, image 1 de 1

    • And this one

    Modifier

  7. Repairing HTC Wildfire S broken screen: étape 7, image 1 de 1

    • Lift up the retainer using a plastic opening tool.

    Modifier

  8. Repairing HTC Wildfire S broken screen: étape 8, image 1 de 1

    • And carefully pull out the tab connector.

    • NOW PAUSE WITHOUT MOVING ANYTHING!

    Modifier

  10. Repairing HTC Wildfire S broken screen: étape 9, image 1 de 1

    • NOTE THIS FLEXIBLE RIBBON

    Modifier

  11. Repairing HTC Wildfire S broken screen: étape 10, image 1 de 1

    • Carefully lift up the board from the left-hand side allowing it to 'hinge' on the metallic ribbon connector you have just noted and allow it to lay flat

    Modifier

    Is this a HTC Wildfire S or Wildfire?

    Andre Quintana - Réponse

    That's not HTC Wildfire S.

    It's the previous model HTC Wildfire.

    Billy Loizos - Réponse

    Is this wildfire a 3333 or wildfire s?

    paul - Réponse

  12. Repairing HTC Wildfire S broken screen: étape 11, image 1 de 1

    • The freed connector for the screen should have unfolded

    • Now the screen can be pried from the outer case, but take care as you do so not to tear the metallic ribbon between the two casings

    Modifier

  13. Repairing HTC Wildfire S broken screen: étape 12, image 1 de 1

    • To detach the screen it can help to use a pry tool to push the screen from behind through the slot

    Modifier

  14. Repairing HTC Wildfire S broken screen: étape 13, image 1 de 1

    • The screen is detached and the connector can be wiggled out through the slot

    Modifier

  15. Repairing HTC Wildfire S broken screen: étape 14, image 1 de 1

    • Remove the old screen and connector altogether

    Modifier

  16. Repairing HTC Wildfire S broken screen: étape 15, image 1 de 1

    • The connector for the new screen now has to be wiggled back through the slot

    Modifier

  17. Repairing HTC Wildfire S broken screen: étape 16, image 1 de 1

    • Once the connecter is pushed through the slot, you should now stick the new screen into place using suitable adhesive strip

    Modifier

  18. Repairing HTC Wildfire S broken screen: étape 17, image 1 de 1

    • Fold down the ribbon connector from the screen and carefully fold the two casing halves together again, making sure that the two connectors are sticking out of the side

    Modifier

  19. Repairing HTC Wildfire S broken screen: étape 18, image 1 de 1

    • Reconnect the two connectors on the right hand side by pressing down

    Modifier

  20. Repairing HTC Wildfire S broken screen: étape 19, image 1 de 1

    • Reinsert the ribbon connector on the left hand side and push down the retaining catch

    Modifier

  21. Repairing HTC Wildfire S broken screen: étape 20, image 1 de 1

    • Clip the rear casing back on to the body

    Modifier

  22. Repairing HTC Wildfire S broken screen: étape 21, image 1 de 1

    • Put the bottom cover back in place and then replace all the screws

    Modifier

  23. Repairing HTC Wildfire S broken screen: étape 22, image 1 de 1

    • Replace battery and battery cover and all should now be well!

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

8 autres ont terminé cette réparation.

Auteur

avec 1 autre contributeur

Mikey Willbiscuit

Membre depuis le 05/13/13

507 Réputation

1 tutoriel rédigé

Badges: 6

+ 3 badges supplémentaires

2 commentaires de tutoriel

Nice detailing of the teardown steps but the phone shown here is a regular HTC Wildfire (HTC G8) and not the latter HTC Wildfire S (HTC G13). Apparently, the orignal Wildfire has two variants (A3333 and A310e). Each variant uses a different digitizer (the touch glass panel on top of the actual LCD). If you need to buy a replacement digitizer, verify if your variant has an IC on the digitizer ribbon cable or not. On my phone, the shattered original digitizer had no IC on the ribbon and when I replaced it with one that had one, the phone wouldn’t recognize the touch inpupts.

Jeremy - Réponse

Nice! If you wanna recycle any mobile screen you can contact LCD's Buyers

Thanks

shaffy chalana - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 15

Total : 12,282