Sony BDP BX350 Motherboard Replacement

Kristen Vezina et 2 autres contributeurs

Dernière mise à jour le August 30, 2017

15 minutes

Modérée

Introduction

This is a step-by-step guide on how to replace your Sony BDP BX350 Device Motherboard. This guide is needed if the HDMI port or power input port are faulty. Make sure the disc assembly is taken out before starting this guide.

Ce dont vous avez besoin

Outils

Étape 1 Disc Assembly

Sony BDP BX350 Motherboard Replacement, Disc Assembly: étape 1, image 1 de 1

Remove the three 10mm Philips head screws on the back of the player.

Traduire

Étape 2

Using an opening tool lift up the tabs located on the bottom of the plastic front cover.

Traduire

Étape 3

Lift the tabs located on each side of the device to free the front cover. Begin to separate the front and metal back covers.

Traduire

Étape 4

Completely separate the front cover and the metal back cover from the grey casing.
The inner components should all be completely exposed after opening.

Traduire

Étape 5

Unscrew the two 8mm Philips head screws securing the disc assembly to the main casing.

Traduire

Étape 6

Pull the disc assembly out from under the metal tabs on the main casing.

Traduire

Étape 7

Remove disc assembly.

Traduire

Étape 8 Motherboard

Sony BDP BX350 Motherboard Replacement, Motherboard: étape 8, image 1 de 2

Sony BDP BX350 Motherboard Replacement, Motherboard: étape 8, image 2 de 2

Do not bend or tear the ribbon cable.
Remove all five ribbon cables from the motherboard.

Traduire

Étape 9

Unscrew 3mm Philips head HDMI screw from metal casing.

Traduire

Étape 10

Unscrew the three 5mm Philips head screws from motherboard.
Separate the motherboard from the metal casing by pulling directly up. Use an opening tool if necessary.

Traduire