Introduction

Seeing the image before taking it is vital to taking long-lasting quality pictures. This guide will show you how to properly remove the existing LCD screen.

Pièces

Aucune pièce nécessaire.

Power down the camera and remove the batteries.
  • Power down the camera and remove the batteries.

Ajouter un commentaire

Using a Phillips #0 screwdriver, remove all of the screws from the back panel casing.
  • Using a Phillips #0 screwdriver, remove all of the screws from the back panel casing.

  • There are six 5.22mm long, 3.00mm head diameter screws total.

  • The left side is not shown but there should be 1 screw on that side.

Ajouter un commentaire

  • Remove the back casing.

  • The casing itself is sturdy so don't be afraid to remove it forcefully.

Ajouter un commentaire

  • Take a hold of the right side of the LCD screen and lift it towards the left.

  • The screen is held firm and will require a bit of force to ease it from its housing.

you need to open the know locked the cable on the top-right side before lift the screen.

Linh Đoàn - Réponse

  • Unplug the large conductive tape attached to the screen.

  • Remove the LCD from the device.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Trystan Jasperson

Membre depuis le 17/03/2018

231 Réputation

2 tutoriels rédigés

Équipe

Baylor, Team S5-G4, Williams Spring 2018 Membre de l'équipe Baylor, Team S5-G4, Williams Spring 2018

BU-WILLIAMS-S18S5G4

3 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 6

Total : 69