Réparez vos affaires

Droit à la réparation

Boutique

Sony Cyber-shot DSC-W150 Back Casing Replacement

Rédigé par : iRobot (et 6 autres contributeurs)
  • Commentaires : 0
  • Favoris : 1
  • Réparations terminées : 4

Difficulté

Très facile

Étapes

7

Temps nécessaire

5 minutes

Sections

1

Drapeaux

2

Grammar Police

Police de grammaire

Réveillez le prof qui sommeille en vous et aidez-nous à améliorer l'orthographe de ce tutoriel !

Member-Contributed Guide

Un membre a contribué à ce tutoriel

Un membre tout à fait remarquable de notre communauté a réalisé ce tutoriel. Il n'a pas été dirigé par l'équipe iFixit.

Introduction

This repair guide will aid you in the steps to disassemble the Sony Cyber-shot DSC W150 in order to replace a scratched or broken back casing.

Outils

Acheter ces outils

Pièces

Aucune pièce spécifiée.

  1. The screws from the camera are extremely small so it is a good idea to have a small container to hold all the screws as you remove them.

    • The screws from the camera are extremely small so it is a good idea to have a small container to hold all the screws as you remove them.

    Traduire

  2. Take your screwdriver and remove the bottom screws of the camera. (The picture shows the lens facing away from you and the LCD facing you.) There should be four silver screws.

    • Take your screwdriver and remove the bottom screws of the camera. (The picture shows the lens facing away from you and the LCD facing you.) There should be four silver screws.

    Traduire

  3. On the right side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and LCD screen facing you.)

    • On the right side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and LCD screen facing you.)

    Traduire

  5. On the left side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and the LCD screen facing you.)

    • On the left side of the camera, remove the two screws using the screwdriver. There will be two silver screws. (The picture shows the lens facing away from you and the LCD screen facing you.)

    Traduire

  6. Gently remove the back casing by holding onto both sides of the camera and pulling them apart.

    • Gently remove the back casing by holding onto both sides of the camera and pulling them apart.

    Traduire

  7. Now, carefully pull off the back cover.

    • Now, carefully pull off the back cover.

    Traduire

  8. The two halves of the camera casing should now be separate.

    • The two halves of the camera casing should now be separate.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autre(s) ont terminé cette réparation.

Plume

avec 6 autres contributeurs

iRobot

Membre depuis le 24/09/2009

1 Réputation

648 tutoriels rédigés

Badges: 35

+ 32 badges supplémentaires

0 commentaires

Ajouter un commentaire

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 4,803