Sony NEX-5R Main Navigation Button Replacement

Emily Trujillo et 5 autres contributeurs

Dernière mise à jour le May 7, 2024

15 - 20 minutes

Modérée

Introduction

The removal of the main navigation button involves removing the rear casing and carefully prying off the button as to not damage the sensitive components.

Ce dont vous avez besoin

Outils

Afficher plus…

Étape 1 Rear Case

Sony NEX-5R Main Navigation Button Replacement, Rear Case: étape 1, image 1 de 1

Remove the three (3.5 mm) screws from the bottom of the camera with the Phillips screwdriver.

Modifier

Étape 2

Open the HDMI port, and remove the the two (3.5 mm) Phillips screws exposed on that side.

Modifier

Étape 3

Remove the two 4mm screws from the interior of the battery pack, and one 3.5mm screw from beside it.

Modifier

Étape 4

Looking at the bottom of the camera, use the spudger to lift the rear case away from the camera body.

Modifier

Étape 5

Using the spudger again, carefully pry from the top of the camera to remove the back frame.
The back frame is fragile, so use the spudger gently.

Modifier

Étape 6

The back case should now be removed and look like this.

Modifier

Étape 7 Main Navigation Button

Sony NEX-5R Main Navigation Button Replacement, Main Navigation Button: étape 7, image 1 de 1

Use spudger to pull the lead out from its housing.

Modifier

Étape 8

Outil utilisé dans cette étape :

Tweezers

$4.99

Ajouter au panier

Squeeze the lead with the tweezers and hold the lead teeth tightly with your fingers. Pull straight out to disconnect.

Modifier

Étape 9

The navigation button component should now be separate and able to be replaced with new component. The camera and navigation button should appear as shown.

Modifier