Aller au contenu principal

Introduction

Use this guide to replace or upgrade RAM cards in your Toshiba Satellite L305-S5946. Replacing your RAM cards will allow you to work with more programs. Doing this requires only removal of the battery as a precursor.

  1. Turn the laptop upside-down.
    • Turn the laptop upside-down.

    • Position the laptop so that the display hinges are facing away from you.

  2. Slide the left battery bay latch to the left.
    • Slide the left battery bay latch to the left.

  3. Slide the right battery bay latch to the right and hold. While holding onto the latch, use a plastic opening tool to lift and remove the battery bay cover. Remove the battery.
    • Slide the right battery bay latch to the right and hold.

    • While holding onto the latch, use a plastic opening tool to lift and remove the battery bay cover.

    • Remove the battery.

  4. Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant
  5. Use a Phillips #1 screwdriver to turn the screw on the RAM cover.
    • Use a Phillips #1 screwdriver to turn the screw on the RAM cover.

    • Turn the screw until you hear a click.

    • This is a captive panel screw and remains with the cover.

  6. Insert the plastic opening tool into the indent and lift to remove the RAM cover. This is a captive panel screw and remains with the cover.
    • Insert the plastic opening tool into the indent and lift to remove the RAM cover.

    • This is a captive panel screw and remains with the cover.

  7. Use your fingernails to push the white and silver retaining clips away from each side of the RAM card. The RAM card should pop up at an angle.
    • Use your fingernails to push the white and silver retaining clips away from each side of the RAM card.

    • The RAM card should pop up at an angle.

  8. Use your fingers to gently pull the RAM card away from the computer. Repeat step 9 to remove the other RAM card that may be installed.
    • Use your fingers to gently pull the RAM card away from the computer.

    • Repeat step 9 to remove the other RAM card that may be installed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Michael Erberich

Membre depuis le 17/04/2013

106 Réputation

9 tutoriels rédigés

Équipe

Cal Poly, Team 3-49, Amido Spring 2013 Membre de l'équipe Cal Poly, Team 3-49, Amido Spring 2013

CPSU-AMIDO-S13S3G49

4 membres

10 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 479