Unscrew the three screws from the back panel with Phillips #0 screwdriver.
  • Unscrew the three screws from the back panel with Phillips #0 screwdriver.

  • Remove the back panel.

Ajouter un commentaire

Locate the two clips holding the RAM chip in place.
  • Locate the two clips holding the RAM chip in place.

  • Apply pressure to each clip, pulling them away from the RAM.

  • One end of the RAM will pop out.

Ajouter un commentaire

  • Gently pull RAM out as shown.

Ajouter un commentaire

  • To intall a new stick of RAM, carefully insert it into into the RAM slot.

  • Gently push down on the RAM chip until it snaps securely into place.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Michael Jensen

Membre depuis le 18/04/2011

417 Réputation

6 tutoriels rédigés

Équipe

Cal Poly, Team 4-3, Regan Spring 2011 Membre de l'équipe Cal Poly, Team 4-3, Regan Spring 2011

CPSU-REGAN-S11S4G3

5 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 2,546