Modifications apportées à l'étape #1
Modifié par Adam Lourenco —
Modification approuvée par Adam Lourenco
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] Using a Philips P0 screw driver, unscrew the two 8mm screws from the panel. |
|---|---|
| + | [* black] Take a spudger and wedge it between the panel and the base of the device. |
| + | [* black] Push down on the spudger until you hear a click that the panel has detached from the base. |
| + | [* black] Slide the spudger along the panel and continue to push down until the panel is completely detached. |
| + | [* black] Remove the panel |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté