Modifications apportées à l'étape #2
Modifié par Nneoma Maxine Ugwu —
Modification approuvée par Nneoma Maxine Ugwu
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] On the leftmost part of the device will be the hard drive secured by four 8mm P0 philips screws. |
|---|---|
| - | [* red] Using the P0 screw driver, remove these four screws. |
| - | [* orange] The hard drive is attached to the device by the white ribbon cable. |
| - | [* black] Take the spudger and prop up the connector so it is no longer attached. |
| - | [* black] Next take the spudger and prop up the hard drive and remove it. |
| + | [* red] Using the Phillips 0 screw driver, remove the four 8mm screws holding down the hard drive. |
| + | [* orange] Take the spudger and prop up the connector so it is no longer attached. |
| + | [* black] Use the spudger and prop up the hard drive and remove it. |