Aller au contenu principal

Modifications apportées à l'étape #13

Modifié par Luc van Calmthout

Modification approuvée par Luc van Calmthout

Avant
Après
Inchangé

Lignes de l'étape

-[* black] On the top plate you can remove the electric circuit board by unscrewing the two 4 mm screws holding it to the top. This can be done with the crosshead screwdriver you used previously.
+[* black] Remove the electric circuit board from the top cover by unscrewing the two 4 mm screws attaching it. This can be done with the crosshead screwdriver you used before.