Modifications apportées à l'étape #5
Modifié par Josh Harvey —
Modification approuvée par Josh Harvey
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Remove the two screws holding the heating unit in place. |
|---|---|
| + | [* red] Remove the two 1.6cm screws holding the heating unit in place with a PH0 screwdriver. |
| [* icon_note] Were removing the heating unit because it also holds the circuit board in place. | |
| [* orange] Using a flathead screwdriver (or similar tool) remove the outer clips holding the heating unit in place. | |
| [* black] Pull up the heating unit to allow access to the circuit board. |