Modifications apportées à l'étape #6
Modifié par Marty Rippens —
Modification approuvée par Marty Rippens
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Remove the four 11mm |
|---|---|
| + | [* red] Remove the four 11mm Phillips head screws in each corner of the plastic containment box. |
| [* black] Pull the top from the plastic housing. | |
| [* black] Lift the circuit board out of the plastic housing and set it aside until a latter step. |