| | [* black] Carefully scrape 5 glue dots from edges of CCD on old lens assembly. Note that photo is of a different camera & screw numbering is different; also, this would be done before lens assembly is installed. |
|---|
| | [* black] Remove 3 screws securing CCD to back of lens assembly and remove CCD, noting any tiny brass washers/spacers that may be present where screws were. |
|---|
| | [* black] Remove rubber infrared filter gasket and infrared filter (small rectangle of bluish glass) from back of old lens assembly) & install on back of new lens assembly. |
|---|
| | [* black] Install CCD on back of new lens assembly (may or may not need to use brass washers to get alignment right for correct focus). |
|---|
| | [* black] Note: S100 & S110 CCDs are not interchangeable - ribbon connector for the S100 lens assembly is larger, & does not fit on the S110 board connector. |
|---|