| - | [* black] It may be easier to get the ribbon cables for the new lens assembly plugged in BEFORE replacing the 5 screws that hold the lens assembly to the camera body. The lower/smaller one is especially tricky - I have found that it is easiest to get it fully seated with the lens assembly not quite in place. |
|---|
| + | [* black] It may be easier to get the ribbon cables for the new lens assembly plugged in BEFORE replacing the 5 screws that hold the lens assembly to the camera body. |
|---|
| + | [* black] Lower/smaller one is especially tricky - I have found that it is easiest to get it fully seated with the lens assembly not quite in place. |
|---|
| + | [* black] If, after completing reassembly, lens error persists, double check that lower lens unit ribbon cable is fully plugged in. If it is not fully seated it will cause a lens error. |
|---|