Modifications apportées à l'étape #9
Lignes de l'étape
| + | [title] Adding thermal paste |
|---|---|
| + | [* black] I used Arctic MX-4 for these step for its thermal properties, and it was hanging around in my desk. You can use any thermal paste that you would like, just use the same process. |
| + | [* black] Drop a pea sized drop on each die. As long as your paste is not electrically conductive, do not worry if you put a little too much on. |
| + | [* black] You'll know if you have put the right amount of thermal paste if your temperatures are lower/you are not thermal throttling anymore. |
Image 1
Aucune image précédente
Ajouté