Modifications apportées à l'étape #3
Modifié par angelea Ramirez —
Modification approuvée par angelea Ramirez
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Finally, use a soldering iron to de-solder the two speaker wires from the speaker itself. Ensure that the device is turned off when handling bare wire. Once de-soldered, you are finished! Re-assemble by following steps in reverse. |
|---|---|
| + | [* black] Finally, use a soldering iron to de-solder the two speaker wires from the speaker itself. Once de-soldered, you are finished! |
| + | [* icon_reminder] Ensure that the device is turned off when handling bare wire |
| + | [* icon_caution] Soldering iron is very hot. |
| + | [* icon_note] Re-assemble by following steps in reverse. |