Modifications apportées à l'étape #2
Lignes de l'étape
| + | [* black] Start by taking the screws from around the frame off. |
|---|---|
| + | [* black] Then remove the screws from this PCB |
| + | [* black] If you are replacing screen components, skip to step 7 |
| + | [* black] Remove the little foam pads from the two connectors on the PCB These are for the digitizer |
| + | [* black] Flip up the releases on the plugs to pull out the ribbon cable. (I will show some more detailed pictures of the same process on other connectors. |
Image 1
Aucune image précédente
Ajouté