Modifications apportées à l'étape #2
Lignes de l'étape
| [* black] Start by taking the screws from around the frame off. | |
| [* black] Then remove the screws from this PCB | |
| - | [* black] If you are replacing screen components, skip to step |
| + | [* black] If you are replacing screen components, skip to step 7 |
| [* black] Remove the little foam pads from the two connectors on the PCB These are for the digitizer | |
| [* black] Flip up the releases on the plugs to pull out the ribbon cable. (I will show some more detailed pictures of the same process on other connectors. |