Modifications apportées à l'étape #1
Modifié par Andrew Optimus Goldheart —
Modification approuvée par Andrew Optimus Goldheart
- Avant
- Après
- Inchangé
Lignes de l'étape
| + | [* black] Flip the logic board assembly back over to expose the connectors on the back. |
|---|---|
| [* black] Use the edge of a plastic opening tool to gently pry the antenna connector off the back of the logic board. | |
| [* icon_caution] This cable is very delicate, be careful not to stress the point where it connects to the antenna. |