Modifications apportées à l'étape #3
Lignes de l'étape
| + | [title] Remove old touchpad |
|---|---|
| + | [* icon_note] As the touchpad is held in place by glue strips, the next steps are necessarily destructive . You should be prepared with a new touchpad that you have confirmed will work before removing the old one. |
| + | [* icon_caution] If you raise the keyboard frame to extract the touchpad, be careful of the two sides as they are not well supported and could easily snap. |
| + | [* black] You can remove the top part of the old touchpad by using a spudger or plastic tool to take it off the hinges. |
| + | [* black] Using a spudger between the frame and the touchpad get underneath and separate from the glue strip. |
| + | [* black] Once removed, you can see the old glue strip by raising the keyboard frame. |
Image 1
Aucune image précédente
Ajouté
Image 2
Aucune image précédente
Ajouté
Image 3
Aucune image précédente
Ajouté